top of page

hey do say better late than never, as well as our own saying that perfection takes time and these Gen 3 Mini flares most definitely fall in to that category and boy oh boy have they been worth the wait time.

Due to the huge success of our Gen 2 flares it was only a matter of time that we would launch a flare set for the Generation 3 chassis and with looking what is on the market we are extremely glad we did, with our signature look now ready for all the F56 & F57 Gen 3 chassis.


The great thing about the Gen 3 is there is no cutting of the OEM metalwork like there is on the Gen 2 chassis, if the conversion is done sensibly like our own demo Cooper D Hatch, the new flares have to be bonded on as you can get behind the fixing points like you can with the Gen 2, so it’s a simple case of bonding and clamping each flare.

We fitted H&R 35mm lowering springs with some 9.5x18 3SDM wheels, wrapped in 245/35R18 & 255/35R18 Nankang tyres and all we had to do was roll the rear metal work slightly so there is no scrub on the 255 rear tyres and the overall finished look is pretty stunning, this look will just never get old, and just gives the new Gen 3 the look it needs.


For the customers looking to track and get the most out of the wheel fitment with these flares, you can fit up to a 9.5” wheel with a +10 offset for the front and a 10x18 wheel with a +10 on the rear with 245/35 & 265/35 tyres front and rear to suit, It’s amazing how these wider flares transfer the look of your basic Gen 3 Mini.

Next up we plan on tooling up for the Mini R60 Countryman and the R61 Paceman, as these doesn’t seem to be anything available for these 2 Mini Chassis, we plan on changing that.


 

Our Mega Mini conversions are now available as a drive in drive out conversion for the R55, R56, R57, R58 & R59 chassis, so as long as you own one of these models, our conversion is available, from the Cooper Diesel upto the Cooper S, let’s look at what you get for your money.


For our drive in drive out the conversions consists of the following:

Full window tint (with the choice of privacy shades ) Full De-Chrome VAD Wider flares fitted and painted A choice of wheel & tyre combo 9x16 > 245/45R16 / 9x17 > 245/40R17 / 9x18 > 245/35R18 Coilover Suspension



We will be adding other additional parts to the conversion with lots of options coming for the not only the exterior but the interior too.


As long as you have the above Chassis get in touch with us if you fancy adding a bit of sauce to your Mini, with our mega mini makeover.


Wheels maketh the car right, so it’s important to choose not just the right design but the right wheel brand and with so many wheel brands on the market where do you start, which is a difficult choice for us, so I can only imagine what that’s like for you the customer, that is looking to make or break their build, and it really is a mine field of good and not so good product.


Over the last couple of years, we have become very disgruntled with the wheel brands we have been involved with that are manufactured stateside, as the loyalty, quality and customer service seems to have gone backwards, as the wheel market shrinks with new wheel brands that seem to open on a weekly basis, which is having an impact on the larger brands as they push for more sales, so its numbers over brand quality.






We have already covered our forged range of magnesium wheels, along with the brands we source from Japan which are some of our favourite wheel brands, and it helps that the Japanese are so easy to deal with and quality over quantity is what they are renown for, which is us to a tee, but we are happy to say we are adding a fresh high quality brand to the VAD line up and its home grown to, right here in the UK, 3SDM.



3SDM FORGED WHEELS


We have been chatting to Dylan the owner for a while, buying some of his cast wheels for our Mini R56 wide flare conversions and although they supply a few companies around the UK, we will not only be offering the 3SDM brand, but working with them on other exciting products, whilst they will also be making some of our own VAD wheel designs, and all on our door step, which is a huge bonus.

Lead time are the usual 4 to 6 weeks, which can grow depending on how busy the factory is, but we aim to half that by finishing our own wheels, that will be done exclusively by our wheel refinishing partners Speedwells who are based in Birmingham not too far from the VAD HQ.

A full option list of size, width and finish is available with every PCD and offset catered for, to include centre lock, new and old, as well as bespoke applications and limited exclusive production runs, we will also be working with the team on our own unique wheel designs, so keep an eye out for further details and if you require an information on the line up and what’s coming over the next few months, do not hesitate to get in touch with us.






It's all in the details... 3SDM Forged 3 piece wheels


  • VAD Facebook
  • VAD Twitter
  • VAD YouTube
  • VAD Instagram
  Website Design By VAD
  part of the Vad International Group
GT3RR-BMW-Z4-GT3_edited.png
Office Hours

Monday to Friday 9.00 am > 5.30 pm
Saturday                9.00 am > 1.00 pm
Sunday                   Closed

Unit 5
James Road
Tyseley
Birmingham
B11 2BA
Art...Some people collect it, We like to build it
bottom of page